SWITCH GOULDS (MOTOR) 614234-1

CAPACITOR NO.1#610807-1 1/3-1/2H

CAPACITOR NO.2 #610807-2 3/4-11/

START CAPACITOR #610807-32

PVC PIPE CUTTER 1/2 - 1 #151-053

PLASTIC PIPE CUTTER 1/2 X 1

Key Features
Compression inlet stainless steel
Bulk with flag label
304 stainless steel braid over on extruded tough durable EPDM tube Washing machine hoses stainless steel compression inlet 3/4 inch f.h.t. By 3/4 inch f.h.t. Bulk with flag label lgth. Ins. =60 3/4 inches FHT x 3/4 inches FHT. Bulk with flag label

REGULATOR LP GASS LOW PRESSURE(R

GAS REGULATOR 780707

MANIFOLD TEE INV FLX1/4MT (FOR G

PLUG INVERTED FLARE (FOR GAS TEE

PIGTAIL

These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.

Male hard nose POL (7/8 in. nut) x 1/4 in. male inverted flare
1/4 in. hose I.D.
Tank connection: POL

PIGTAIL GAS SUPPLY LINE 7/8X20"

NO-HUB COUPLING 1-1/2